Automated test complex Scvorets of “N” series is designed to control, to diagnose and to perform troubleshooting of digital and digital-to-analog electronic modules with special or household purpose.
ATC Scvorets-N can be used in repair and control labs and workshops of plants and factories that manufacture equipment including movable labs and workshops of offsite repair crew.
Technical features:
№ п/п |
Parameter |
Value |
---|---|---|
1 |
Number of digital channels (forming of test pulses and analysis of the feedback) |
192 channels that can be programmed |
2 |
Maximum source / sink current of each channel |
50 mА |
3 |
Length of synchronized test sequences |
128К test-sets |
4 |
Channels overload protection on voltage from +12 V до -2 V |
up to 5 sec |
5 |
Programmed levels of digital channels (level of logical zero and logical unit is set separately for each channel) |
from +12V to -2V with set discretization 0.1V |
6 |
Integrated interface to control the devices |
USB, RS-232, Ethernet |
7 |
Power intake |
at most 150 W |
8 |
Frequency of forming test pulses and analyzing the feedback in all modes |
up to 10 MHz |
9 |
Possibility of synchronization |
- integrated generator to be programmed; - external triggering; - external synchronization |
10 |
Integrated pattern analyzer for all channels with the possibility to gather automatically patterns in database |
there is probe to measure and compare pattern signals inside board |
11 |
Integrated programmed power sources for diagnosed object |
2 pcs |
12 |
Integrated digital oscilloscope with two channels |
present |
13 |
Integrated generator with two channels |
present |
14 |
Integrated characteristic tracer – visual analyzer of complex resistance of the point for parametric control |
present |
15 |
Size |
at most 510х490х200 |
16 |
Weight |
at most 14 kg |
17 |
Power |
electric network 220 V 50 Hz |
18 |
The management of the ATC is performed |
with the laptop via interface Ethernet |